Klik link diatas untuk melihat daftar harga

Canon RC-1 Wireless Remote Control

This miniature infrared transmitter operates at ranges of up to 5m/16.4 ft., and may be set for either instant shutter release or 2-second delay. The RC-1 may also be used to activate mirror-lock and bulb-shutter functions. If you have a Canon EOS Digital Rebel 300D, a Canon EOS Digital Rebel XT 350D or another supported camera body, the Canon RC-1 Wireless Remote is a must-have accessory. The RC-1 is small, light, inexpensive and highly useful. Point the Canon RC-1 Wireless Remote toward the front of the camera (line of sight only) and take full control the shutter. According to Canon: "This miniature infrared transmitter operates at ranges of up to 5m/16.4 ft., and may be set for either instant shutter release or 2-second delay. The RC-1 may also be used to activate mirror-lock and bulb-shutter functions."

The picture above shows the two parts of the Canon RC-1 Wireless Remote. The back may be threaded onto a camera strap for storage/transport. Unclip the remote release for use. No more vibrations caused by physically pressing the shutter release. No more running to get into the picture after releasing the self timer. No more running back to the camera for the second just-in-case-your-aunt-blinked shot. Stay near your subject to assist composition (or ease stress). The Canon RC-1 Wireless Remote is a very useful device. Supported models include the Digital Rebel XT 350D, Digital Rebel 300D, Elan 7/7E, Elan II/IIE, Elan, IX, 10S, Rebel Ti (Date model only).

Canon RS 60E3 Remote

A compact remote switch with a 2 ft. cable replicating all functions of the camera's shutter release button. Handy for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure. Note: Compatible with EOS Elan II/IIE, Elan 7/7E, Rebel Ti /2000/G/GII/X/XS, IX/IX Lite. Digital Rebel, XT, XTI. The Remote Switch RS-60E3 is ideal for preventing camera shake for telephoto shots- macrophotography- and bulb exposures. With a 2-ft. cable it replicates all the functions of the camera AEs shutter- release button

Specifications for Canon RS 60E3 Remote

Canon RS-80N3 Remote Switch

A compact Remote Switch with a 2.6'/80cm cable to prevent camera shake for super telephoto shots, macrophotography and bulb exposures. Handy for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure. The Remote Switch works just like a shutter button, enabling halfway or complete pressing. It also has a shutter-release lock. With the EOS-3's Custom Function No. 12 (mirror lockup), camera shake can be further reduced.

Canon TC-80N3 Timer Remote Control

The Canon TC-80N3 is a remote switch with an 80cm/2.6ft. cord and a self-timer, interval timer, long-exposure timer, and exposure-count setting feature. The timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec. A dial enables you to easily enter the numeric settings with a single thumb. The LCD panel can also be illuminated. And the rear of the Controller has a hole to keep the EOS-3's remote control socket cap. Timer remote controller for EOS-3 equipped with quick-lock remote control socket. (Shutter release function provided.)  In-Operation: After the operation starts, the mode's icon blinks on the display panel and the remaining time or number of exposures counts down. When modes are used in combination, the active mode's icon blinks and the standby mode's icon stays on while the remaining time or number of exposures counts down.

Hold Function: When the LAMP button is pressed for 3 sec., the MODE button and Jog dial are disabled and the HOLD icon is displayed on the display panel. The Hold function is cancelled by pressing the LAMP button again for 3 sec. Hold Function: When the LAMP button is pressed for 3 sec. the MODE button and Jog dial are disabled and the HOLD icon is displayed on the display panel. The Hold function is cancelled by pressing the LAMP button again for 3 sec. Items Displayed: Icons for the self-timer, interval timer, long exposure timer, and exposure count setting mode. Time and exposure count. HOLD and low-battery icons.