POIN & SHOOT

Clip it, point and shoot. This cutting-edge photographic technology for AF and TTL auto exposure systems never fails to deliver the desired result. A beautiful picture is automatically obtained.
Di466 enables more convenient operation and superior outcomes.

EVERY OPPORTUNITY

The flash produces the same color as sunlight. It also proves very helpful for daylight photography. Eliminate the shade under trees.
Use fill-in lighting to sharpen the subject. Address catchlight in the eyes, and stop motion. Emphasize the lighting contrast.

Tired of your flash no longer whenever a new camera comes onto the market?
A firmware upgrade service is available for the Di466, which provides a service terminal to upload the latest software.
A charge for the firmware update service will apply, varying depending on the area. Please check at your local dealer for details about the update service.

• Olympus E-P2 / E-P1 / E-PL1
• Olympus E-620 / E-520 / E-410
• Lumix GF-1 / GH-1 / G-1
• Lumix DMC-LX3

KEY FEATURES

WHITE EDITION 
Nissin group and our products are always on the cutting edge of design, technology and innovation. 
New Di466 is designed for Fourth Thirds system SLR cameras with a classic chic look and high performances. This is the best choice for fashion-conscious photographer.

TTL FLASH
Di466 responds to Olympus's TTL system, and Lumix's TTL system.
Those new digital TTL flash systems control the flash light with greater precision and stability

NISSIN ORIGINAL “MY TTL” SETTING
The TTL flash power level is pre-set for reasonable exposure at factory. You can, however, reset the power at the desired exposure level, in +-3/4Ev. by 1/4Ev increments.
The preset value is memorized as your personal standard after switching the unit off.
This unique system for customizing your level settings, called MY TTL, is a feature exclusive to Nissin.
The usual TTL flash level compensation works based on this customized level.

TTL FLASH LEVEL COMPENSATION
The power of the flash can be controlled with TTL flash level compensation.
Whereas total exposure is controlled by the camera's EV compensation function, the flash can compensate for the exposure on the main subject only, with little impact on the exposure of the background scene.
The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.

BATTERY MAGAZINE Quick Loading System
2 sec. loading by Nissin original battery magazine.
A convenient battery magazine has the slots for all four batteries in the same direction, with an anti-reverse loading guide so that the batteries can be correctly inserted every time, even in poor lighting. An extra battery magazine is separately available.

SILENT OSCILLATION
The oscillation circuit produces frequencies that are inaudible to humans.
The sharp humming of the oscillator can cause irritation, which may be quite severe in certain settings.

DUAL PROGRAM WIRELESS REMOTE FLASH
The wireless remote flash system of Di466 works for either analogue (single flash) and digital (pre-flash) flash systems. Variable power in six steps is available.
Place the Di466 off the camera and the flash synchronizes with the master flash placed on your camera. This wireless remote flash system is called slave flash technology and is often used for a creative lighting efficiency.
Use the camera's built-in flash, the manufacturer's original flash, or Di466 as the master flash. Place one or more Di466 flash units away from the camera.
Off-camera flash photography offers a different lighting configuration.
Use multiple Di466 flash units to achieve professional flash techniques.

POWER ZOOM & TURNING FLASH HEAD
Light distribution angle is automatically adjusted for the lens focal length. A high quality stepping motor sharply traces the lens movement with the same speed as that of the camera manufacturer's original flash.
The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to70mm of the digital lens.(*) For a longer lens, the flash head reflector position stays at 70mm.
It turns 90 degree upward for bounce lighting.
The flash head also stores a small reflection panel for a fill-in shot.
(*) The focal length for the traditional SLR camera is to be multiplied by a factor of 1.5 times.

• Compatible cameras : Micro Four Thirds M4/3 & Four Thirds 4/3 camera 
• Guide Number : 33 /109 at 53mm focal length (ISO 100m/ft)
• Illumination angle: 12~53mm (9mm with diffuse panel) (Automatically set for the lens focal length)
• Variable power : 6 levels : Full -1/2 -1/4 - 1/8 - 1/16 - 1/32 powers
• Flash exposure control : 
  [for Olympas and Lumix] TTL 
  
• Power source : 4 X LR6(AA) or equivalent Mi-MH, lithium, oxyride batteries
• Recycling time : 
  0.2 - 4.5 sec., by fresh alkaline batteries
  0.2 - 3.8 sec., by Ni-MH batteries
• Energy saving system : 5 minutes to stand-by mode, 30 minutes to shut down
• Number of flashes : 200 - 1500 flashes by fresh alkaline batteries
• Turning head : Flash head up to 0° ~ 90° with click-stops at 0°, 45°, 60°, 75°, 90°
• Slave mode : 
  Slave 1 for digital pre-flash system
  Slave 2 for traditional single flash system
  Power level - same as variable power above
• AF Assist light : Orange LED for distance of 0.7 to 6 meter.
• Color temperature : 5,600K (same as daylight)
• Flash duration : 1/800sec. to 1/20,000sec.
• Camera contact : Hotshoe only (not compatible with the traditional hotshoe system)
• Accessories included : Shoe stand, Pouch
• Dimensions : 67(W) x 105(D) x 95(H) mm / 21(W) x 41(D) x 37(H) inches
• Weight : 240g (without battery) / 8.4oz