The SE-800 AV & DV video switchers are flexible solutions for any studio and are supported by a large family of Datavideo accessories. The SE-800 video switcher comes in digital and analog versions (SE-800DV and SE-800AV), accommodating almost any studio set-up.

The DV model includes 4 DV/AV inputs and outputs for SDI, DV, Composite, Component, and S-video. It also includes an output for an SDI overlay channel for use with a CG (character generator) that uses a down stream keyer (DSK). Using the SDI overlay allows the character generator to appear in all of the SE-800DV outputs        

The SE-800 video switcher also includes an internal audio mixer with both mic and line level audio inputs. (Built-in audio delay will ensure correct lip-synch works on all formats) Both models include TBC and a format converter, so each input source may be seen with a composite video monitor

Each unit is compatible with a family of Datavideo accessories:  monitor holders, shipping cases, mobile studios (and their compatible products) intercoms, character generators, and more.  We have several SE-800 "kits" available that include a switcher and monitor, but you can build a kit of your own with the available accessories. As with all Datavideo products, the SE-800 works on 12vDC or local power

There are four different kits available for the SE-800. Click here for more details.

Features

    Monitor output: one composite output for each input via included composite video format converters

    Next source preview and tally - optional with RMC-140

    No genlock required - frame synchronizer and TBC built-in for each active source for flicker-free switching

    Input selector - main and sub bus selector. Cut direct between sources via the main bus

    Preset keys - 30 quick selection keys for preset event and effects

    Voice synch - audio advanced to audio delayed, +3/-19 frames

    Built-in audio mixer - 6 channel stereo mixer for mixing the audio from video with house audio or AUX inputs or microphone

    Adjustable audio delay for frame accurate and perfect synchronizers between video and external audio

    Joystick control can be used for either RGB color correction (white balance corrections) or position the PIP or Mosaic effect

    Picture-In-Picture (two fixed sizes)

    Color processor - brightness, contrast, and color setting. White balanced for each input. Last settings saved at power up

    Digital effects - 15 transitions plus border, six speeds, plus six special effects

    Easy tilting with Datavideo CG-100 character generator

    SDI graphics overlay - use any SDI based character generator with DSK (down stream keyer). SE-800DV has SDI overlay built in, SE-800AV requires upgrade card.

    Four tally outputs - requires RMC-140 with red/yellow tally lights

    GPI input trigger controls up to 30 pre-programmed effects in sequence

    Headphone monitor

Connections:

Video

    DV version - input: 4 inputs in DV, composite, component, and S-video

    DV version - output: SDI, DV, composite, component, and S-video. SDI overlay for graphics or character generators

    AV version - input: 4 inputs in composite, component, and S-video

    AV version - output: composite, component, and S-video

Audio

    Input: unbalanced, 4 sources (A, B, C, D), Aux 1, Aux 2, stereo and microphone inputs

    Output: unbalanced, 2 main stereo outputs, 1 stereo microphone output

Control

    RS-232 remote control interface

Power

    15V 4.5A DC 110/220 power supply and cord included

Rear view (SE800AV)

Rear view (SE-800DV)